Table 8. Virtualization Support
Option Description
Virtualization This option specifies whether a Virtual Machine Monitor (VMM) can utilize the
additional hardware capabilities provided by Intel Virtualization technology.
• Enable Intel Virtualization Technology — This option is enabled by default.
VT for Direct I/O Enables or disables the VMM from utilizing the additional hardware capabilities
provided by Intel Virtualization technology for direct I/O.
• Enable Intel Virtualization Technology for Direct I/O — This option is enabled by
default.
NOTE: This is supported only on Intel Xeon processor-based systems.
Trusted Execution This option specifies whether a Measured Virtual Machine Monitor (MVMM) can
utilize the additional hardware capabilities provided by Intel Trusted Execution
technology. The TPM virtualization technology and virtualization technology for direct
I/O must be enabled to use this feature.
• Trusted Execution — This option is disabled by default.
NOTE: This is supported only on Intel Xeon processor-based systems.
Table 9. Maintenance
Option Description
Service Tag Displays the service tag of your system.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option
is not set by default.
SERR Messages Controls the SERR message mechanism. This option is not set by default. Some
graphics cards require that the SERR message mechanism be disabled.
Table 10. System Logs
Option Description
BIOS events Displays the system event log and allows you to clear the log.
• Clear Log
Boot Manager Screen
Option Description
LEGACY/UEFI BOOT Allows you to select a one-time boot device from bootable devices list.
OTHER OPTIONS
BIOS Setup Enters System Setup.
BIOS Flash Update Allows you to update the BIOS from the USB drive with the released BIOS file. This
option is for advanced users.
22
To Next Page
Loading...
