Dell PowerEdge T410 - Installing the Front Bezel

86 Installing System Components
Figure 3-2. Removing and Installing the Front Bezel
Installing the Front Bezel
1 Insert the bezel tabs into the bezel tab slots in the chassis. See Figure 3-2.
2 Press the top end of the bezel into the chassis until the lever locks into place.
3 Using the system key, lock the bezel.
1 front bezel 2 release latch
3 bezel tab slots (2) 4 bezel tabs (2)
4
2
1
3
book.book Page 86 Tuesday, June 9, 2009 4:09 PM