Figure 47. 16 x 2.5-inch drive backplane
1. BP_DST_SB1 (backplane to front PERC) 2. BP_PWR_CTRL (front PERC power and control signal)
3. BP_DST_SA1 (backplane to front PERC) 4. BP_PWR_1 (backplane power and signal cable to system
board)
Figure 48. 24 x 2.5-inch drive backplane
1.
DST_SA1 2. SRC_SA1
3. DST_SB1 4. BP_PWR_1
5. BP_DST_PA1 (PCIe/NVMe connector) 6. BP_PWR_2
7. BP_ DST_PB1 (PCIe/NVMe connector) 8. BP_PWR_CTRL
9. BP_ DST_PA2 (PCIe/NVMe connector) 10. BP_ DST_PB2 (PCIe/NVMe connector)
Figure 49. 24 x 2.5-inch NVMe switched backplane
1.
BP_PWR_CTRL2 2. BP_PWR_2
3. BP_PWR_1 4. BP_PWR_CTRL1
Component installation guidelines 43
To Next Page
Loading...
