Jumpers and connectors
This section provides essential and specific information about jumpers and switches. It also describes the connectors on the
various boards in the system. Jumpers on the system board help to disable the system and reset the passwords. To install
components and cables correctly, you must be able to identify the connectors on the system board.
System board connectors
System board jumpers and connectors on the R750 system are described as follows:
Figure 65. System board jumpers and connectors
Table 70. System board jumpers and connectors
Item Connector Description
1. LFT_CP Left control panel connector
2. BAT_SIG NVDIMM battery signal
3. PSU 2 Power supply unit 2
4. IO_RISER4 (CPU2) Riser 4
6
Jumpers and connectors 73
To Next Page
Loading...
