Dell PowerFlex R750 - Left Control Panel View

Table 1. Features available on the front of the system (continued)
Item Ports, panels, and
slots
Icon Description
using mobile devices called as OpenManage Mobile (OMM) feature. Using iDRAC
Quick Sync 2 with OpenManage Mobile (OMM) aggregates hardware or firmware
inventory and various system level diagnostic and error information that can be
used in troubleshooting the system. For more information, see the Integrated
Dell Remote Access Controller User's Guide available at https://www.dell.com/
idracmanuals
2 Drive N/A Enables you to install drives that are supported on your system.
3 Right control panel N/A Contains the power button, USB port, iDRAC Direct micro port, and the iDRAC
Direct status LED.
4 Information tag N/A The Information tag is a slide-out label panel that contains system information such
as Service Tag, NIC, MAC address, and so on. If you have opted for the secure
default access to iDRAC, then the Information tag will also contain the iDRAC secure
default password.
NOTE: For more information, see the Dell EMC PowerEdge R750 Technical Specifications on the product documentation
page.
Left control panel view
Figure 2. Left control panel without optional iDRAC Quick Sync 2 indicator
Table 2. Left control panel without optional iDRAC Quick Sync 2 indicator
Item Indicator, button, or
connector
Icon Description
1 Status LED indicators N/A Indicates the status of the system. For more information, see
Status LED indicators.
2 System health and system
ID indicator
Indicates the system health. For more information, see System
diagnostics and indicator codes
Figure 3. Left control panel with optional iDRAC Quick Sync 2 indicator
System overview
7