Initial Configuration of Your NAS System 11
2
Initial Configuration of Your NAS
System
Configuring Your Storage System Using Keyboard,
Monitor, and Mouse
1
Connect one end of an Ethernet cable into one of the 10/100/1000 RJ-45
Network Interface Cable (NIC) connectors at the back of your NAS system
and the other end to a working Ethernet port.
2
Connect one end of the power cable to the NAS system and the other end
to a power source.
3
Connect a keyboard, monitor, and mouse to the NAS system.
4
Press the power button to turn on the NAS system.
5
Log on to the NAS system as administrator. The default password is
Stor@ge!
.
6
The
Dell PowerVault NAS
Initial Configuration Wizard
guides you with:
a
An option for changing the default password.
b
Selecting and configuring the back-end storage software, if applicable.
c
Selecting and configuring the default system language, if needed.
d
Confirming the settings.
e
Rebooting the system, if necessary.
7
After reboot, log on to the system using the administrator account.
8
The
Server Manager
window opens each time an administrator logs on. If
Server Manager does not open, you can open it by clicking
Start
Administrative Tools
Server Manager
.
book.book Page 11 Thursday, September 2, 2010 2:36 PM
To Next Page
Loading...
Need help?
General