26 Reinstalling the NAS Operating System
6
The
PowerVault NAS Initial Configuration Wizard
guides you through
the following steps:
• Installing the NAS Appliance software
• Changing the default administrator password
• Installing the back-end storage software (when applicable)
• Selecting and installing the language pack if needed
7
After the
PowerVault NAS Initial Configuration Wizard
completes, the
NAS system reboots to apply the settings.
8
After reboot, log on to the system using the administrator account to
launch the Server Manager.
book.book Page 26 Thursday, September 2, 2010 2:36 PM
To Next Page
Loading...
