c. WLAN
d. WWAN
3. To remove the display hinge brackets:
a. Remove the screw that secures the display hinge bracket to the computer [1].
b. Remove the display hinge bracket from the computer [2].
4. To disconnect display cable:
a. Unroute the WLAN and WWAN cables from the dock frame [1].
b. Remove the screw that secures the eDP cable bracket to the computer [2].
c. Remove the eDP cable bracket to access the display cable [3].
d. Disconnect the eDP cable from the system board [4].
5. To disconnect the display assembly:
a. Unroute the display cable from the dock frame [1].
18
To Next Page
Loading...
