4. To remove the keyboard:
a. Remove the screws that secure the keyboard to the computer [1].
b. Lift the keyboard and slide it to remove it from computer [2, 3].
Installing the keyboard
1. Align the keyboard with the screw holders on the computer.
2. Tighten the screws to secure the keyboard to the computer.
3. Align the keyboard trim with the tabs on the computer and press it until it clicks into place
4. Connect the keyboard cables to the connectors on the system board.
5. Install the:
a. battery
b. base cover
6. Follow the procedure in After working inside your system.
Removing the display assembly
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
17
To Next Page
Loading...
