Dell Precision 3510 - Installing the Coin-Cell Battery; Removing the Speakers

Installing the coin cell battery
1. Place the coin cell battery into the slot on the system board.
2. Connect the coin cell battery cable to the connector on the system board.
3. Install the:
a. battery
b. base cover
4. Follow the procedure in After working inside your computer.
Removing the speakers
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
c. memory module
d. hard drive assembly or M.2 SSD or PCIe SSD
e. dock frame
3. To remove the speaker:
a. Disconnect the speaker cable [1].
b. Disconnect the LED board cable from the LED board.
c. Unroute the cables from the retention clips on the computer [2].
d. Lift the speaker from the computer [3].
29