Next steps
1. Install the display bezel.
2. Install the display assembly.
3. Install the WWAN card.
4. Install the wireless card.
5. Install the base cover.
6. Install the microSD card.
7. Install the SIM card.
8. Follow the procedure in After working inside your computer.
Camera
Removing the camera
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the microSD card.
4. Remove the base cover.
5. Remove the Wireless card.
6. Remove the WWAN card.
7. Remove the display assembly.
8. Remove the display bezel.
9. Remove the display panel.
10. Remove the display hinges.
About this task
The following images indicate the location of the camera module and provide a visual representation of the removal procedure.
Removing and installing components
105
To Next Page
Loading...
