Next steps
1. Install the assembly inner frame.
2. Install the battery.
3. Install the hard drive.
4. Install the WWAN card.
5. Install the wireless card.
6. Install the 2280 solid-state drive or 2230 solid-state drive.
7. Install the base cover.
8. Install the microSD card.
9. Install the SIM tray.
10. Follow the procedure in After working inside your computer.
Heat sink
Removing the heat sink and fan assembly - UMA
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the microSD card.
4. Remove the base cover.
About this task
The following images indicate the location of the heat sink and fan assembly and provide a visual representation of the removal
procedure.
Removing and installing components
61
To Next Page
Loading...
