About this task
The following images indicate the location of the dummy SIM-card slot filler and provides a visual representation of the dummy
SIM-card slot filler installation procedure.
Steps
1. Place the dummy SIM-card slot filler into its compartment on the palm rest.
NOTE: Ensure that the dummy SIM-card slot filler is aligned with the ribs on the palm-rest assembly.
2. Press the dummy SIM-card slot filler until it clicks into place and ensure it fits securely into the SIM card slot.
Next steps
1. Install the display assembly.
2. Install the keyboard assembly.
3. Install the smart card reader.
4. Install the LED board.
5. Install the power-button board.
6. Install the system board.
7. Install the assembly inner frame.
8. Install the speakers.
9. Install the battery.
10. Install the WWAN card.
11. Install the wireless card.
12. Install the 2280 solid-state drive or 2230 solid-state drive.
13. Install the memory module.
14. Install the base cover.
15. Install the microSD card.
16. Install the SIM card.
17. Follow the procedure in After working inside your computer.
120
Removing and installing components
To Next Page
Loading...
