Steps
1. Align and place the keyboard on the keyboard bracket.
2. Replace the 14 screws (M2x2) to secure the keyboard to the keyboard bracket.
NOTE: For 5G WWAN configuration, ensure that you transfer the absorber to new keyboard bracket.
Next steps
1. Install the keyboard assembly.
2. Install the system board.
3. Install the assembly inner frame.
4. Install the battery.
5. Install the hard drive.
6. Install the WWAN card.
7. Install the wireless card.
8. Install the 2280 solid-state drive or 2230 solid-state drive.
9. Install the base cover.
10. Install the microSD card.
11. Install the SIM card.
12. Follow the procedure in After working inside your computer.
Removing and installing components
89
To Next Page
Loading...
