2. Align the tabs on the side cover with the slots on the chassis.
3. Press the side cover gently.
4. The release latch automatically locks the side cover to the computer.
5. Replace the screw (M6.32x12.7) to secure the release latch.
Next steps
1. Follow the procedure in after working inside your computer.
Power-supply unit cage
Opening the power-supply unit cage
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
About this task
The following images indicate the location of the power-supply unit cage and provide a visual representation of the removal
procedure.
12
Disassembly and reassembly
To Next Page
Loading...
