NOTE: System will sound an alarm for 4 seconds and shut down if top cover is removed while the system is running. The
system will not power on if the top cover is removed.
2 To remove the cover:
a Rotate lock on latch with a Phillips screw driver to release the lock [1].
b Pull the latch to release the top cover [2].
c Lift the top cover away [3].
Installing the system cover
1 Lift up the release latch and align the top cover tabs with the slots on the system chassis [1] and slide it into the slot.
NOTE
: Ensure that all internal cables are routed correctly and connected before securing the top cover.
2 The release latch automatically locks the top cover to the system.
16
Removing and installing components
To Next Page
Loading...
