Dell Precision 3930 Rack - Memory Module

5 Install the:
a Hard drives
b Air duct
c Top cover
6 Follow the procedure in After working inside your computer.
Memory module
Removing memory module
1 Follow the procedure in Before working inside your computer.
NOTE
: Allow the memory modules to cool after you power o the system. Handle the memory module by the card edges
and avoid touching the components or metallic contacts on the memory module.
2 Remove the:
a Top cover
b Air duct
3 To remove the memory module:
a Press open the retention tabs from both sides to lift the memory module from the connector [1].
b Remove the memory module from the system board [2].
Removing and installing components
37