2 Follow the procedure in After working inside your computer.
Installing the second redundant PSU
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a Second PSU blank
b Top cover
c Second PSU fan blank
3 Install the:
a Second PSU fan
b Connect fan cable to power distribution board "FAN2" connector.
NOTE
: Refer to the System fan section.
NOTE: Fold and tuck excess fan cable in the gap on the left side of the fan.
c Insert the PSU in the chassis and slide it into the slot until it locks.
56
Removing and installing components
To Next Page
Loading...
