b Using a plastic scribe, pry the base cover from the right corner of the palm-rest and keyboard assembly.
NOTE: Do not begin to pry the base cover from top edge (next to hinges), as this may break the plastic clips and lead
to cosmetic damage.
c Pry the base cover starting from the right side of palm-rest and keyboard assembly.
d Pry the base cover from the bottom left corner of the palm-rest and keyboard assembly.
e Pry the base cover from the left side of the palm-rest and keyboard assembly.
f Move the base cover from left to right and lift the base cover from the palm-rest and keyboard assembly.
14
Removing and installing components
To Next Page
Loading...
