Component Secured to Screw type Quantity Screw image
Solid-state drive System board M2x3 1
System board Palm-rest and keyboard
assembly
M2x3 2
USB Type-C bracket I/O board M2x4 3
Type-C USB bracket System board M2x4 3
Wireless-antenna
bracket
System board M2x4 2
Base cover
Removing the base cover
1 Follow the procedure in Before working inside your computer
2 To remove the base cover:
a Remove the eight torx head screws (M2x3) that secure the base cover to the palm-rest and keyboard assembly.
Removing and installing components
13
To Next Page
Loading...
