DELL™ PRECISION™ T1650 TECHNICAL GUIDEBOOK
10
DRIVES AND REMOVABLE STORAGE (CON’T)
SYSTEM EXPANSION SLOTS
NOTE: See Detailed Engineering Specifications for supported voltage, maximum wattage and card dimensions.
PCIe x16 Slot Gen 3 1
PCIe x16 (wired x4) Slot Gen 2 1
PCIe x1 Slot Gen 2 1
PCI 32/33 Slot 1
Serial ATA (SATA) connectors 4
Optical Drive:
5.25” Blu-ray Writer SATA 1.5Gbit/s X
Slimline Blu-ray Writer SATA 1.5Gbit/s X
Slimline DVD+/-RW
1
SATA 1.5Gbit/s X
Slimline DVD-ROM
2
SATA 1.5Gbit/s X
Media Card Reader:
Dell 19 in 1 Media Card Reader X
5.25” DVD+/-RW
1
SATA 1.5Gbit/s X
5.25” DVD-ROM
2
SATA 1.5Gbit/s X
EXTERNAL PORTS/CONNECTORS
NOTE: See chassis diagrams section for port/connector locations
USB 3.0 2 Front, 2 Rear
USB 2.0 2 Front, 4 Rear, 2 Internal
Serial 1 Rear (2nd via optional Add in Card)
Network Connector (RJ-45) 1 Rear
PS/2 2 Rear
1394 Controller via optional PCI card Optional via Add in Card
Parallel Optional via Parallel / Serial Add in Card
1
Discs burned with this drive may not be compatible with some existing drives and players; using DVD+R media provides maximum compatibility.
2
DVD-ROM drives may have write-capable hardware that has been disabled via firmware modifications.
NOTE: Dell 19 in 1 Media Card Reader (MCR) is supported via a F5 to F3 bay converter in the 5.25” Optical Drive Bay.
NOTE: Slimline Optical drives can only be configured when a Memory Card Reader is configured.