Dell PRECISION T1650 - Removing and Installing Components; Recommended Tools; Removing the Cover; Installing the Cover

DELL™ PRECISION™ T1650 TECHNICAL GUIDEBOOK
7
MEMORY
NOTE: The Dell Precision T1650 has a dual channel memory bus architecture. Dell recommends that two memory channels be
populated with DIMMS for maximum memory performance. Please note, UDIMM ECC and NECC memory cannot be mixed.
NOTE: Maximum memory speed is tied to processor. 1600 MHz memory will run at a reduced speed of 1333 MHz when paired
with the Intel® Core i3-2120 or Intel® Core i3-2130 processors.
1
The total amount of available memory will be less than 4GB on systems running 32-bit operating systems. The amount less depends on the actual
system configuration. To fully utilize 4GB or more of memory requires a 64-bit operating system.
Type: DDR3 Synch DRAM Non-ECC and ECC
Max Frequency 1600 MHz
DIMM Slots 4
DIMM Capacities Up to 8GB
Minimum Memory 2GB
Maximum System Memory 32GB
Memory configurations
ECC UDIMM Memory
32GB (4 x 8 GB) DDR3, 1600 MHz X
16GB (4 x 4 GB) DDR3, 1600 MHz X
8GB (2 x 4 GB) DDR3, 1600 MHz X
8GB (4 x 2 GB) DDR3, 1333 MHz X
4GB
1
(2 x 2 GB) DDR3, 1600 MHz, X
4GB
1
(2 x 2 GB) DDR3, 1333 MHz, X
Non- ECC Memory (NECC)
16GB (4 x 4GB) DDR3, 1600 MHz X
4GB
1
(2 x 2 GB) DDR3, 1600 MHz, X
2GB (1 x 2 GB) DDR3, 1600 MHz, X
8GB (2 x 4 GB) DDR3, 1600 MHz X
8GB (4 x 2 GB) DDR3, 1600 MHz X
8GB (4 x 2 GB) DDR3, 1600 MHz X