Installing the Power Supply Unit (PSU)
1. Hold the PSU handle and push the unit into its compartment until it clicks into place.
2. Follow the procedures in After Working Inside Your Computer.
Removing the Front Cover
NOTE: The front cover can be secured using the front panel-chassis lock. For more information the
front-panel chassis lock, see Additional Information — Front Panel Chassis Lock.
1. Follow the procedures in Before Working Inside Your Computer.
2. Press down on the front cover release latch.
3. Keep the latch pushed down, and pull the front cover in an outward direction to remove it from the
computer.
13
To Next Page
Loading...
