7. Remove the screws that secure the USB 3.0 module to the I/O panel assembly and remove it from
the computer.
8. Remove the screws that secure the I/O panel and remove it from the I/O panel assembly.
Installing the I/O Panel and the USB 3.0 Ports
1. Place the I/O panel and install the screws to secure it in place.
2. Place the USB 3.0 module on the I/O panel assembly and install the screws to secure it in place.
3. Re-seat the I/O panel assembly on the chassis and secure it to the chassis clips on both sides.
4. Install the screws that secure the I/O panel assembly to the chassis.
5. Connect all the cables to the I/O panel.
36
To Next Page
Loading...
