Installing the Power Supply Unit (PSU) Card
1. Install the screws that secure the PSU card to the chassis.
2. Connect all the cables to the PSU card.
3. Install:
a. PSU
b. right cover
4. Follow the procedures in After Working Inside Your Computer.
Removing the System Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a. left cover
b. optical drive
c. optical drive holder
d. memory shroud base (s)
e. memory shrouds
f. heat sink
g. PCIe card retention
h. PCI card(s)
i. memory module (s)
j. processor
3. Disconnect all the connectors from the system board.
48
To Next Page
Loading...
