Installing the Coin-Cell Battery
1. Place the coin-cell battery into the slot on the system board.
2. Press the coin-cell battery downward until the release latch springs back into place and secures it.
3. Install:
a. PCIe card
b. left cover
4. Follow the procedures in After Working Inside Your Computer.
Removing the Heatsink
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. left cover
b. memory shroud (center)
3. Disconnect the heatsink fan cable from the system board.
4. Remove the captive screws that secure the heatsink.
26
To Next Page
Loading...
