Dell Precision Workstation T1500 - Optical Drive; Removing the Optical Drive

Back to Contents Page
Optical Drive
DellPrecision™WorkstationT1500ServiceManual
Removing the Optical Drive
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the Cover.
3. Remove the Front Panel.
4. Disconnect the data cable from the back of the optical drive.
5. Disconnect the power cable from the back of the optical drive.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.