Dell Precision Workstation T1500 - Chassis Fan; Removing the Chassis Fan

Chassis Fan
DellPrecision™WorkstationT1500ServiceManual
Removing the Chassis Fan
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the Cover.
3. Disconnect the fan cable from the system board.
4. While holding the chassis fan in place, remove the two screws that secure the fan to the chassis.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.