Dell Precision Workstation T1500 - Power Supply; Removing the Power Supply

Back to Contents Page
Power Supply
DellPrecision™WorkstationT1500ServiceManual
Removing the Power Supply
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the Cover.
3. Disconnect power cables from internal devices — hard drives, optical drives, and/or media card readers (if any).
4. Disconnect the power cables from the system board, expansion cards, and drives.
5. Remove the cables from the routing clips (if any) on the chassis.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.