Dell R210 II

Dell PowerEdge R210 II Technical Guide 44
12 Storage
12.1 Overview
The PowerEdge R210 II supports the following hard drive configurations:
 2 x 3.5” cabled SATA drives using the motherboard SATA connector
 2 x 3.5” cabled SAS, nearline SAS, or SATA drives using an add-on storage controller
 4 x 2.5” SSD or SAS drives using an add-on storage controller
The hard-drive configuration must be selected at point of purchase and is not an upgrade option.
12.2 Hard Drives
Table 13 lists the supported hard drives for the PowerEdge R210 II. For the latest information on
supported hard drives, visit Dell.com.
Table 13. Supported Hard Drives
Form Factor
Capacity
Speed
Type
3.5”
250GB, 500GB, 1TB, 2TB, 4TB
7.2K
SATA
3.5”
500GB, 1TB, 2TB, 4TB
7.2K
NL SAS
3.5”
146GB, 300GB, 450GB, 600GB
15K
SAS
2.5”
100GB, 200GB
N/A
SATA SSD
2.5”
146GB, 300GB, 600GB, 900GB
10K
SAS
12.3 RAID Configurations
Table 14 details the factory RAID configurations for the PowerEdge R210 II.
Table 14. Factory RAID Configurations
Non-Mixed Drives,
all SATA, all SSD,
or all SAS
Config
Type
Configurations
# Name
Description
Min HDD
Max
HDD
SATA—No
RAID
1
MSTCBL
On-board SATA Controller
1
2
SATA RAID
2
MSTR0CBL
Embedded SATA SW RAID (PERC S100)—RAID 0
2
2