Setting Up the Monitor | 23
Connecting the USB cable
After you have completed connecting the DVI/VGA/HDMI cable, follow the procedures
below to connect the USB cable to the computer and complete your monitor setup:
1. Connect the upstream USB port (cable supplied) to an appropriate USB port on
your computer. (See
Bottom View
for details.)
2. Plug the power cables for your computer and monitor into a nearby outlet.
3. Turn on the Monitor and the computer.
When your USB cable connection is complete, if the touch function does not
functional, see
Touch Problem
.
4. Use the cable slot on the monitor stand to organize the cables.
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (See
Connecting Your
Monitor
for cable attachment,) organize all cables as shown above.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
