WARNING: Do not charge a non Qi (WPC)/PMA certified device, or place any
other object in the wireless charging area. If you use a Qi (WPC)/PMA certified
wireless charging cover for the mobile device, do not place the cover in the
charging area without the mobile device in it.
WARNING: Do not place any magnetic storage media (like floppy disks or
credit cards) near the charging area. The data on the media can get erased.
NOTE: The time taken to charge the mobile device completely depends on the
charge remaining on the device and it’s charging efficiency.
NOTE: To avoid any interference while your device is charging, do not place
anything around the device and the charging area.
NOTE: It it normal that the charging stand base and mobile device gets warm
while charging.
NOTE: The wireless charging function will be turned off if the monitor power is
turned Off.
Charge status LED behavior
The following table describes the status that LED indicates:
LED Indicator Activities
White LED lights up for 3 seconds and
turns off
Wireless charging is enabled.
LED does not turn on when the device is
placed in the charging area.
Not charging.
White LED Charging.
White LED turns off The battery of your device is fully
charged.
White LED appears for 2 seconds and
turns off
Notifies that the battery of your device is
actually fully charged and you may want
to remove it from the charging pad.
To Next Page
Loading...
