Dell S2409WFP - Using the On-Screen Display (Osd) Menu


Using the On-Screen display (OSD) Menu
1. Push to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
Or
Main Menu for non Analog (non VGA) Input
If either VGA or DVI-D input is selected and both VGA and DVI-
D cables are not connected, a floating dialog box as shown
below appears.
or
or
or
5
Power button
(withpowerlightindicator)
Usethepowerbuttontoturnthemonitoronandoff.
Thegreenlightindicatesthatthemonitorisonandfullyfunctional.Anamberlightindicatespowersavemode.
NOTE: Ifyouchangethesettingsandtheneitherproceedtoanothermenu,orexittheOSDmenu,themonitorautomaticallysavesthechanges.The
changes are also saved if you change the settings and then wait for the OSD menu to disappear.