48 | Operating the monitor
Activate the computer and wake up the monitor to gain access to the OSD.
If you adjust the Brightness level above the default level(default level is 75%), the
following message is displayed:
Yes No
S2722DGM
Adjusting to this value will increase power consumption above
the default level. Do you want to continue?
Dell 27 Gaming Monitor
If you press any button other than the power button, the following messages is
displayed depending on the selected input:
Dell 27 Gaming Monitor
S2722DGM
No DP signal from your device.
Press any key on the keyboard or move the mouse or wake it up.
If there is no display, press the monitor button again to select the correct
input source.
If either DisplayPort, HDMI 1 and HDMI 2 input is selected and the corresponding cable
is not connected, a floating dialog box as shown below appears.
S2722DGM
The display will go into Standby Mode in 4 minutes.
www.dell.com/S2722DGM
No DP Cable
Dell 27 Gaming Monitor
or
To Next Page
Loading...
