About your monitor │ 15
Monitor specifications
Model S3422DWG
Screen type Active matrix-TFT LCD
Panel type Vertical Alignment
Viewable image
Diagonal
Horizontal, Active Area
Vertical, Active Area
Total Area
864.2 mm (34.0 in.)
797.2 mm (31.19 in.)
333.7 mm (13.14 in.)
2660048.26 mm
2
(412.38 in.
2
)
Native resolution and
refresh rate
3440 x 1440 at 100 Hz (HDMI1 and HDMI2)
3440 x 1440 at 144 Hz (DP)
Pixel pitch 0.23175 mm x 0.23175 mm
Pixel per inch (PPI) 109
Viewing angle
Horizontal
Vertical
178° (typical)
178° (typical)
Luminance output 400 cd/m² (typical)
Contrast ratio 3000:1 (typical)
Faceplate coating Anti-glare with 3H hardness, Haze 40%
Backlight LED edgelight system
Response time 8 ms gray to gray in Fast Mode
4 ms gray to gray in Super Fast Mode
2 ms gray to gray in Extreme Mode*
1 ms gray to gray in MPRT Mode
*The 2 ms gray-to-gray is achievable in the Extreme
mode to reduce visible motion blur and increased image
responsiveness. However this may introduce some
slight and noticeable visual artifacts into the image. As
every system setup and every user's needs are different
modes to find the setting that is right for them.
To Next Page
