Dell SE2717Hc - Electrical Specifications; Physical Characteristics

12 | About your monitor
Electrical specifications
Model SE2717H/SE2717HX
Video input signals
∞
HDMI 1.4, 600mV for each differential line,
100 ohm input impedance per differential pair,
Analog RGB, 0.7 Volts +/-5%, positive polarity at
75 ohm input impedance
AC input voltage/frequency/
current
100 VAC to 240 VAC / 50 Hz or 60 Hz
±
3 Hz / 1.5A
Note: The AC input current need to be 1.5A
(typical).
Inrush current
∞
120 V: 30 A (Max.) at 0°C (cold start)
∞
240 V: 60 A (Max.) at 0°C (cold start)
Physical characteristics
Model SE2717H/SE2717HX
Signal cable type
∞
Digital: detachable, HDMI, 19 pins
∞
Analog: detachable, D-Sub, 15 pins
Dimensions (with stand)
Height 458.7 mm (18.06 in)
Width 621.1 mm (24.45 in)
Depth 185.4 mm (7.30 in)
Dimensions (without stand)
Height 369.0 mm (14.53 in)
Width 621.1 mm (24.45 in)
Depth 56.6 mm (2.23 in)
Stand dimensions
Height 182.8 mm (7.20 in)
Width 244.6 mm (9.63 in)
Depth 185.4 mm (7.30 in)
Weight
Weight with packaging 8.60 kg (18.96 lb)
Weight with stand assembly and
cables
6.10 kg (13.45 lb)
Weight without stand assembly
(no cables)
4.80 kg (10.58 lb)
Weight of stand assembly 1.04 kg (2.29 lb)
Front-frame gloss (minimum) Black frame - 85 gloss units