20 | Setting up the monitor
Removing the stand
NOTE: To prevent scratches on the LCD screen while removing the stand,
ensure that the monitor is placed on a soft and clean surface.
NOTE: This is applicable for a monitor with a stand. When any other stand
is bought, please refer to the respective stand setup guide for the set-up
instructions.
To remove the stand:
1.
Place the monitor on a soft cloth or cushion.
2.
Use a long and thin screwdriver to push the release latch.
3.
Once the latch is released, remove the base away from the monitor.
2
3
2
To Next Page
Loading...
