Dell Vostro 3490 - Coin-Cell Battery; Removing the Coin-Cell; Installing the Coin-Cell Battery

Next steps
1. Connect the battery cable to the connector on the system board.
2. Replace the base cover
3. Replace the SD memory card
4. Follow the procedure in after working inside your computer
Coin-cell battery
Removing the coin-cell
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the SD memory card
3. Remove the base cover
4. Disconnect the battery cable from the connector on the system board.
Steps
1. Using a plastic scribe, gently pry the coin-cell battery out of the slot on the I/O board [1].
2. [2].
Installing the coin-cell battery
Steps
1. With the positive-side facing up, insert the coin-cell battery into the battery socket on the I/O board [1].
2. Press the battery until it clicks into place [2].
Removing and installing components
25