Dell Vostro 5460 - Installing the System Fan; Removing the Heat Sink

Installing the Memory
1. Insert the memory module into the memory socket.
2. Press the memory module down until it clicks into place.
3. Install:
a) heat sink
b) system fan
c) battery
d) base cover
4. Follow the procedures in After Working Inside Your Computer .
Removing the System Board
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove :
a) base cover
b) battery
c) system fan
d) heat sink
e) memory
3. Disconnect the following cables:
a) speaker
b) display
c) keyboard
d) touchpad
e) camera
16