Dell Vostro 5460 - Installing the Camera Module

Installing the Display
1. Align the display to the base panel by pressing along the edges.
2. Install the screws that secure the display.
3. Install :
a) battery
b) base cover
c) display assembly
d) display bezel
4. Follow the procedures in After Working Inside Your Computer.
Removing the Camera
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove :
a) base cover
b) battery
c) display assembly
d) display bezel
e) display
3. Disconnect the camera cable and lift the camera to remove it from the computer.
Installing the Camera
1. Align the camera to the base panel .
2. Connect the camera cable to the camera.
3. Install :
a) battery
b) base cover
c) display assembly
d) display bezel
e) display
4. Follow the procedures in After Working Inside Your Computer.
26