Installing the Hard Drive
1. Place the hard drive assembly into its slot on the computer.
2. Install:
a) battery
b) base cover
3. Follow the procedures in
After Working Inside Your Computer.
Removing the Coin-Cell Battery
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove :
a) base cover
b) battery
3. Perform the steps as shown in the illustration:
a) Disconnect the coin-cell battery cable from its connector on the system board.
b) Unroute the coin-cell battery cable from the routing channel.
c) Lift and remove the coin-cell from the computer.
13
To Next Page
Loading...
