a. battery
b. base cover
5. Follow the procedure in After working inside your computer.
Hard drive
Removing the hard drive
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
3. To disconnect the cable:
a. Lift the latch, and disconnect the hard drive cable from the system [1].
b. Pry the hard drive cable to release the adhesive from the battery [2].
4. To remove the hard drive:
a. Remove the four M2.0 x 3 screws that secure the hard drive to the system [1].
b. Lift the hard drive away from the system [2].
14
Removing and installing components
To Next Page
Loading...
