Dell Vostro 5471 - Installing the Edp Cable; Display Back Cover Assembly; Removing the Display Back Cover

Installing the eDP cable
1. Place the eDP cable on the display panel.
2. Route the eDP cable through the routing channel.
3. Install the:
a. display hinge
b. display panel
c. camera
d. display bezel
e. display assembly
f. WLAN card
g. base cover
4. Follow the procedure in After working inside your computer.
Display back cover assembly
Removing the display back cover
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. WLAN card
c. display assembly
d. display bezel
e. camera
f. display panel
g. display hinge
h. eDP cable
Removing and installing components
43