Removing and installing components
Topics:
• Base cover
•
Battery
• Speaker
• Hard drive
• Coin-cell battery
• Solid State Drive
• Intel Optane card—optional
• WLAN card
• Memory module
• System fan
• Heat sink
• Input Output board
• Power button
• System board
• Touchpad
• Display assembly
• Display bezel
• Camera
• Display panel
• Display hinges
• DC-in
• Keyboard lattice and Keyboard
• Palm rest
• eDP cable
• Display back cover assembly
Base cover
Removing the base cover
1. Follow the procedure in Before working inside your computer.
2. To remove the base cover:
a. Remove the eight M2.5 x 6 screws [1].
b. Loosen the two M2.5 x 6 screws [2].
2
Removing and installing components 9