Installing the System Fan
1. Place the right system fan into its original position in the system board and affix the system board flex
cable.
2. Tighten the screws that secure the right system fan to the system board.
3. Connect the right system fan cable to its connector on the system board.
4. Place the left system fan into its original position in the system board.
5. Tighten the screws that secure the left system fan to the system board.
6. Connect the left system fan cable to its connector on the system board.
7. Install :
a. battery
b. base cover
8. Follow the procedures in After Working Inside Your computer.
Removing the Heatsink
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. base cover
b. battery
c. system fan
3. Remove the screws that secure the heatsink to the system board.
4. Lift up the heatsink and remove from the computer.
20
To Next Page
Loading...
