Installing the Memory
1. Insert the memory module into the memory socket.
2. Press the memory module down until it clicks into place.
3. Install:
a. heatsink
b. system fan
c. battery
d. base cover
4. Follow the procedures in After Working Inside Your computer.
Removing the System Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove :
a. base cover
b. battery
c. system fan
d. heatsink
e. memory
3. Disconnect the following cables:
a. speaker
b. display
c. keyboard
d. touchpad
e. camera
22
To Next Page
Loading...
