Installing the Heatsink
1. Place the heatsink into its original position on the system board.
2. Tighten the screws to secure the heatsink to the system board.
3. Install:
a. system fan
b. battery
c. base cover
4. Follow the procedures in After Working Inside Your computer
Removing the Memory Module
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. base cover
b. battery
c. system fan
d. heatsink
3. Pry the retention clips away from the memory module until it pops up. Remove the memory module
from its connector on the system board.
21
To Next Page
Loading...
