Dell Vostro 5480 - Installing the System Board; Removing the Display Assembly

Installing the System Board
1. Place the system board into its original position on the chassis.
2. Install the screws that secure the system board to the chassis.
3. Connect :
a. camera cable
b. touchpad cable
c. keyboard cable
d. display cable
e. speaker cable
4. Install :
a. memory
b. heatsink
c. system fan
d. battery
e. base cover
5. Follow the procedures in After Working Inside Your computer
Removing the Display Assembly
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove :
a. base cover
b. battery
24