System diagnostics and indicator codes
This section describes the chassis LEDs and diagnostic indicators on the front panel of VxRail P670F, P670N, V670F, and S670.
These diagnostic indicators display the system status during system startup.
Status LED indicators
The status LED indicators are located on the chassis and they indicate the condition of the system. If any error occurs, the
indicators turn solid amber in color.
Icon Description Condition Corrective action
Drive indicator The indicator turns solid amber if there
is a drive error.
● Check the System Event Log to determine if the
drive has an error.
● Run the appropriate Online Diagnostics test.
Restart the system and run embedded diagnostics
(ePSA).
● If the drives are configured in a RAID array,
restart the system, and enter the host adapter
configuration utility program.
Temperature
indicator
The indicator turns solid amber if the
system experiences a thermal error (for
example, the ambient temperature is out
of range or there is a fan failure).
Ensure that none of the following conditions exist:
● A cooling fan has been removed or has failed.
● System cover, air shrouds, or back filler bracket
has been removed.
● Ambient temperature is too high.
● External airflow is obstructed.
If the problem persists, see Dell Technologies Support.
Electrical
indicator
The indicator turns solid amber if the
system experiences an electrical error
(for example, voltage out of range, or
a failed power supply unit (PSU) or
voltage regulator).
Check the System Event Log or system messages for
the specific issue. If it is due to a problem with the
PSU, check the LED on the PSU. Reseat the PSU.
If the problem persists, see Dell Technologies Support.
Memory
indicator
The indicator turns solid amber if a
memory error occurs.
Check the System Event Log or system messages for
the location of the failed memory. Reseat the memory
module.
If the problem persists, see Dell Technologies Support.
PCIe indicator The indicator turns solid amber if a PCIe
card experiences an error.
Restart the system. Update any required drivers for
the PCIe card. Reinstall the card.
If the problem persists, see Dell Technologies Support.
6
System diagnostics and indicator codes 35
To Next Page
Loading...
