Identifier GUID-42A997F5-329D-4712-8018-6C6114C5255F
Version 1
Status Released
Solid-state drive
Identifier GUID-4C447BB6-E656-415C-8D69-6165ACAA9129
Version 1
Status Released
Removing the solid-state drive
Prerequisites
1. Follow the procedure in Before working inside your computer.
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
2. Remove the base cover.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
Steps
1. Loosen the captive screw that secures the wireless-card bracket to the system board.
Removing and installing components
19
To Next Page
Loading...
